New Options within Existing Feature

Logical Switches – But Wait, There’s more!

We just released a blurb about the Logical Switch feature in our Jeti Transmitters and we realized that the video failed to touch on some of the newer options within the Logical Switch programming.

If you were to look inside the transmitter manual, you will find (pg. 107) and explanation of the AND condition, the OR condition, and the MULTI condition. What you cannot find however is an explanation of the A↑ B↓ condition and the XOR condition, so we think posting it here would be beneficial.

XOR is a standard logic function. It’s a logical “exclusive OR” function. For two given logical statements, the XOR function would return TRUE if one of the statements is true and FALSE if both statements are true. If neither of the statements are true, it also returns FALSE (see table below).

A↑ B↓ (is already a complete function): switch A turns the function on and switch B resets it (off).

Logical Switches

A Brief Explanation

Sometimes in flying, you run into a situation when you might want, or need, a more specific set of controls from your transmitter. These situations can be as simple as applying an air brake when your throttle goes below a certain percentage, or more complex situations like if you were to want a remote canopy to open if and only if your airspeed was at zero and your landing gear was deployed. Many transmitters on the market today can provide these controls, however they are called by different names. With any Jeti Transmitter, this feature is known as “Logical Switches”. Logical switches allow you to get specific with mixing your controls and opens up a world of possibilities.

When programming a logical switch with a Jeti Transmitter, you can program any one of your many switches as well as employ the use of your proportional controls, levers, knobs, accelerometers, telemetry controls, and even timers. To program these, you will go to Menu > Advance Properties > Logical Switches. From here you will label your switch, enable it, and assign two controls and a condition (such as and, or, etc.,). Check out the video below where James takes you through the steps needed to use this great feature.

Please note that since the production of this video, Jeti Firmware updates have changed a few of the options found in logical switches.

Here is a great playlist from Harry Curzon that goes over logical switches in great detail.

With a Simple Flip of a Switch!

Now, you can effortlessly turn on and off your RC model with a flip of a switch!

Introducing the Elite Falcon line of ESCs. These new Opto and SBEC speed controllers bring to the table revolutionary design, system upgradability, state of the art telemetry capabilities, and the ability to use a magnetic, touch, or wireless switch to turn on and off your model.

The Falcon product line represents advanced speed controllers for exclusive use in airplanes, drones, sailplanes or any kind of radio control application. With integrated telemetry and various possibilities of optional user configuration, the controllers offer high efficiency, low weight and precise motor control. The telemetry system in the Elite Falcon ESC lets you monitor in real time the Amperage (Amp), Voltage (V), and Capacity (mAh) consumed from the battery, ESC even calculates Power (W) output of the system. You can also measure the ESC Temperature and add external Motor Temperature and Propeller Positioning sensors. The Elite Falcon line of Brushless ESCs adds another revolutionary feature utilizing Backup Battery Integration. We have created a more robust hardware platform including increased cooling capability, smaller overall packaging, and selectable sensitivity to allow you to use any brushless motor that you choose. No matter which size you choose, the Elite Falcon series brushless speed controllers are right for your next project.

Learn more here.