It’s a Bird… It’s a Plane…It’s… Super-Plane!
Check out this beautiful 40% scale Carbon Cub piloted by Mr. Rick Davey. In this video, he explains in detail the aircraft and how he uses the Jeti Duplex System. Check it out!
Rick Davey’s Carbon Cub
Trust In Us
Our Large Windex Runs on Jeti System
The Windex 1200C is a powered sailplane for amateurs construction build by WINDEXAIR AB. Windex 1200c is primarily a high-performance sailplane, but its unique concept with a low-drag fin-mounted engine installation and a variable-pitch propeller turns it also into an efficient touring aircraft with a cruising speed of 210km/h (130 mph). In addition to this the airframe of Windex 1200C is designed for aerobatic routine. The model is very well reproduced and belongs into the super scale class, with its outstanding cockpit interior, beautiful gel-coated finish and excellent flying characteristics. Flying is just amazing due to the acceptable wing loading, it thermals well without any bad behavior and smooth and predictable handling.
But, what are we running in it?!? Jeti of course! We have no worry when it comes to this guy. Jeti’s redundancy gives us that piece of mind we need to focus on our flying. Check it out.
Power & RC/Telemetry System
Jeti DS-16 G2 2.4GHz/900MHz Transmitter
Jeti R10 REX 2.4GHz Receiver
Jeti MUI 75 Voltage/Current/Capacity Sensor
Jeti MVario2 Variometer & Altimeter Sensor
Jeti SBEC 5-8V/12A Voltage Regulator
Jeti AXi 4120/20 Brushless Motor
Jeti Spin Pro 99 Brushless ESC
Jeti Pro Power 5000mAh 6S Battery Pack
APC 14×10 Propeller
Specs:
Wingspan: 161.5″ (4100mm)
Length: 67″ (1700mm)
Weight: 16.5 lbs. (7040-7500g)
Airfoil: HQ 1.5/15-1/12
Wing Area: 1145 sq.in. (74 sg.dm)
Upgraded Cooling on Our OV-10 Bronco
Too Much Hot Air? (OV-10 Bronco Build)
Now, we know that our system is electric, but that doesn’t mean we don’t need efficient cooling! To meet our requirements we added these aluminum cooling vent covers to our OV-10 Bronco. A quick paint job and et voilà – a beautiful new upgrade. Check it out!
Building Our OV-10 Bronco
Good Start to 2023 – Another Beautiful Build (OV-10 Bronco)
As we approached a new year, we decided that we were in need of a good project. To start, our eyes landed on this beautiful Bronco OV-10 scale warbird. This model has been equip with an Elite 40cc electric motor, Elite Falcon 130 ESC, and Hacker Ditex EL Serovs. Thanks to the EX5/SE6 bus system we were able to complete a clean set up of all our wires, and of course we are running it through a Jeti Central Box 320. (Do we need to mention that we are flying it on our Jeti DS-24… you’re right, I didn’t think so).
With a wingspan of 108″ this giant model is a representation of the original 1960’s North American Rockwell OV-10 Bronco. The OV-10 Bronco is an American aircraft which was designed by the U.S. Marine Corps for close air support and ground operations (“North American Rockwell,” 2023). It has a central fuselage that houses the pilots and cargo and two additional booms which are connected with a horizontal stabilizer (“North American Rockwell,” 2023). Each boom supports its own prop engine (or motor in our case).
We love the model as is, but it just wouldn’t feel like ours without a few modifications. Follow along with us as we complete the customization of our beautiful OV-10 Bronco!
Check out the tank and drop modification below!
Source:
North American Rockwell OV-10 Bronco. (2023, January 18th.) In Wikipedia https://en.wikipedia.org/wiki/North_American_Rockwell_OV-10_Bronco.