Jeti Takes On Pylon Racing!

John McDermott, an avid RC Pylon Racer and Jeti Pilot, just completed the 2017 Nats (National Aeromodeling Championships) and it seems he couldn’t be more satisfied with the performance of his Jeti transmitter.

The Jeti Radio System worked perfect.  Very smooth.

States John.  He flew EF1 Pylon, Q500, and Q40, scoring a few wins before heading home. The National Miniature Pylon Racing Association (NMRRA) is the AMA’s official special interest group for those into pylon racing. Check out more about them in the link below.

(Full Story)

*Image from AMA Magazine

 

Jeti Central Box 100 Power Distribution System

The Central Box 100 is a switchboard designed for the complete management of servos in a model with an emphasis on safety. The Central Box has a unique design that provides overload protection at each servo output. The Central Box can manage up to eight servos and fully supports the Jeti EX telemetry system. Up to two receivers with serial (PPM, EX Bus) output can be connected at the same time to the Central Box for complete RF signal redundancy.

With Jeti Duplex 2.4GHz DC/DS transmitters, the full potential of the Central Box can be used, such as an easy way to wirelessly configure the Servo Outputs, EX Telemetry, Fail-Safe Setting or Fast Servo Response.

Fail-Safe Setting
Switches ON/OFF of the Fail-Safe function. If the Fail-Safe function is deactivated, there is no signal generated in any Central Box outputs at the signal loss. If you activate the Fail Safe function, you can also select how the Central Box responds at signal loss for each of the individual outputs.

Servo Mapping
Servo No. – Assigning outputs of the transmitter to the Central Box outputs.
Group – Assigning specific output to the group of output impulses that will be generated from the receiver in the same time.

Duplex Telemetry
Temperature – Temperature of the Central Box
Shorted Outputs No. – Number of Overloaded Outputs
Voltage – Voltage of Individual Outputs of the Central Box
Current – Current Drawn from the Battery
Capacity – Capacity Taken from the Batteries

Richard Muller’s Tomahawk F86

Check out this beautiful piece of art built by Richard Muller. Pictured in the photo is owner Mike Warner and the breathtaking Tomahawk F86. It runs a Jeti Central Box 400, has working pitot tube, flow meter, IGyro, sliding canopy, speed brakes and very precise extra detailing. This plane was one of the  Top Flight winners, taking home the “First in Flight” award.

“Maybe now you can replace the burnt up hawk photo with this one?? I’ll never build a big model on anything but a cb200 or 400!” States Richard.

Well Richard, we are happy you are satisfied!  Currently Richard is in the middle of building a Mibo A10, Tomahawk F5, and a very classified project that we expect to hear more about after Jetpower in September.