Weekend Fun with X-Plus and 1500W
What did you do this weekend? Our X-Plus CF hotliner with Jeti DS-24, Neu 1515/3D motor, 2700 5S battery, 7×7 prop and Mezon Pro 80 ESC performed flawlessly. (80A/1500W/25,000 RPM = FUN)
The X-Plus, New Addition to Our Demo Fleet
Carbon Fiber Fuselage & 2.4GHz Antennas
Jeti Central Box 100 Power Distribution Unit (Mini Dual Redundant System)
The Central Box 100 is a switchboard designed for the complete management of servos in a model with an emphasis on safety. The Central Box has a unique design that provides overload protection at each servo output. The Central Box can manage up to eight servos and fully supports the Jeti EX telemetry system. Up to two receivers with serial (PPM, EX Bus) output can be connected at the same time to the Central Box for complete RF signal redundancy. 
With Jeti Duplex 2.4GHz DC/DS transmitters, the full potential of the Central Box can be used, such as an easy way to wirelessly configure the Servo Outputs, EX Telemetry, Fail-Safe Setting or Fast Servo Response.
Features:
– Control Management with Configurable Servo Output
– Power Distribution with Overload Protection
– Firmware Updatable via Jeti USB Adapter
– Jeti Duplex EX Bus or PPM Compatible
– Wirelessly Programmable Using DC/DS Tx Device Explorer
– Independent Receiver Signal Inputs (Rx 1, Rx 2)
– Up to 8x Servo Outputs with Overload Protection
– Up to 3x Telemetry Sensors Inputs
– Output Current: 10A Continues/90A Peak
Jeti Telemetry Expander E4 EX
The Jeti telemetry expander module allow you to increase the number of telemetry sensors in your aircraft. The E4 ex Expander allows you to add up to four additional sensors directly to any of the Duplex EX 2.4GHz receivers.
Through the Duplex 2.4GHz system and either a JetiBox Profi or Jeti Transmitter you can monitor your data and alarm conditions in real time.
Operational Voltage: 3.2V to 8.4V
Dimensions: 36mm x 20mm x 5mm
Weight: 4g
Gernot Bruckmann Wins Tucson Aerobatic Shootout Invitational and Freestyle Champion
Congratulations Gernot Bruckmann on your dual wins last weekend at the Tucson Aerobatics Shootout in Tucson, Arizona. Gernot traveled all the way from Villach, Austria to compete. His first day of practice was a bit rainy but he flew anyways.
His Facebook post reads “How crazy is this, I still can not believe, Tucson Aerobatic Shootout Invitational and Freestyle Champion💪😎 this is really like a dream came true 👌
I really have to thank all who made this possible, of course all my family, sponsors and of course my girlfriend Bettina Schwaiger for all their help and support 👌”
Jeti Telemetry Sensor Fuel Flow MFlow2
Jeti Telemetry Fuel Flow MFlow2 T and G EX digital flow sensors measure the true fuel flow of gasoline or turbine jet fuel.
The Jeti MFlow2 EX sensor allows you to set your “Low/High Fuel” alarms and gives you accurate reading of fuel consumption. Also allows you to setup remote commands for transmitter wireless value reset. Turbine flow sensor is equipped with Festo 4mm fuel line connectors. Gasoline sensor can be used with Medium 3/32″ (2.4mm), Large 1/8″ (3.2mm) ID fuel tubing.
Through the Duplex 2.4GHz system and either a JetiBox Profi or Jeti Transmitter you can monitor your data and alarm conditions in real time. Make sure that in the Devices folder of your SD card you have a configuration file “MFLOW2.bin”.
Flow Rate: 20 to 800 ml/minute with 2% resolution
Operational Voltage: 5V to 8.4V
Dimensions: 75mm x 40mm x 30mm
Weight: 40g
Alarms: Programmable with JetiBox, JetiBox Mini and JetiBox Profi
Congratulations! Junkers JU188 Successful Maiden
Congratulations. Maiden with Jeti Duplex DC-24, CB400 and 2xCB100, iRC-Electronic Click Connect System, LiIon RX batteries and more from Hacker Motor GmbH.
Jeti Power Main Switch 100A & 200A
Main Switch is an electronic primary switch designed for switching of the main power supply (Main Battery) for your RC model. It adds an element of safety when handling the model, without the need to physically disconnection of the main battery pack. The advantage of an electronic switch is that it offers a virtual unlimited On/Off cycles, unlike mechanically operated switches. The Main Switch prevents the connectors from sparking when connecting the batteries, in fact it also replaces Anti-Spark connectors.
The Main Switch 100 and 200 are shipped with a magnetic or R3/RSW receiver/wireless switch. The Main Switch is primarily designed for switching the main battery of the RC model, but can also be used in applications where switching a DC power supply is needed. 
If main switch is used with R3/RSW receiver/wireless switch the High Voltage Inline Regulator HVR 1W 9.5-59V must be connected to prevent damage to the R3/RSW due to high voltage input.
The Main Switch comes equipped with complete Jeti telemetry. It measure Voltage, Current, Battery Capacity, and Temperature. Alarms can be set to monitor maximum current, minimum voltage, battery used capacity, and maximum temperature.
The Mezon Pro Brushless Electronic Speed Controller (ESC) with Telemetry
The Mezon Pro Brushless Electronic Speed Controller (ESC) with Telemetry, Device Explorer Integration and Wireless Transmitter Programming.
| Jeti Mezon Pro 40 LMR (Sailplane) | $129.00 |
| Jeti Mezon Pro 70 LMR (Sailplane) | $279.00 |
| Jeti Mezon Pro 50 12S | $139.00 |
| Jeti Mezon Pro 80 12S | $289.00 |
| Jeti Mezon Pro 55 Opto 12S | $119.00 |
| Jeti Mezon Pro 85 Opto 12S | $269.00 |