Introducing the Jeti Central Box 400! The Central Box 400 is fully programmable switchboard with two independent, stabilized power voltage regulators designed for complete power and signal management of servos with great emphasis on safety. Watch this video for an up close look.
Take a look at Team Pilot Bob Belluomini after he maidens his beautiful Jet!
Take a look at this review from Jason Cole (RC Groups). It is on his new racing quad, and guess what he uses; the DS-14 and the MULi Sensor! Thank you Jason for the great write up!
Check out C. Brent’s Boomerang Elan running a CB200, MBar, MGPS, and operating on a Jeti DS-16!
Contents: Boomerang Elan, Wren 100 i-Kero turbine, Jeti CB200 with RC switch, dual R3 receivers and dual 2100mAh LiFe packs, dual Jeti Mbar pressure sensors (brakes and gear), Jeti MGPS, Jet-Tronics proportional pressure valves, EvoJet smoke pump, TamJets UltraSpray smoke tube, Xicoy telemetry interface, PowerBox LightBox light controller, Jet-Tech split Kevlar tank (fuel and smoke), DreamWorks Pro-Link gear.
Hey guys, the Central Box 400 is now available to order! It is expected to ship the first week of July. Check it out.
Keep an eye out for our next video release! Our next video showcases the Central Box 400, and will give you an up close and personal look at what it offers!
Setting up a model can be hard work, and often quite confusing. Follow along as Kasi shows you the basic programming menus. In this video she explains the “Function Assignment” screen, and the settings you will come across.
Setting up a model can be hard work, and often quite confusing. Follow along as Kasi shows you the basic programming menus. In this video she explains the “Servo Assignment” screen, and the settings you will come across.
Another Joe Nall has come and gone, and as usual, it did not disappoint. Never before have I seen an aircraft like the one flown by Markus Rummer at the noon time demos. His Delro Raven was anything short of predictable. Running on a custom made Hacker A200 motor, a Spin 300 ESC, and 10,000mAh 12S batteries, his power system pulled around 250 amps and produced over 11,000 watts of power! On top of that, Markus had it fitted with a variable pitch propeller set up. His custom 700 size Spin Helicopter Blades and his use of thrust vectoring made for a captivating demonstration. Watching a 3.1 meter Delro Raven perform maneuvers such as pin wheels and nose down hovering was amazing. It definitely kept us on our toes. However, none of that would have been possible without the Emcotec, Bavarian Demon, and Jeti.
As he flew, he was utilizing the Jeti telemetry to monitor the air speed, Continue reading “Markus Rummer – Revealed”
Watch this great video from Team Pilot Jordan Morse. In it he gives an introduction to the XICOY FC1 Flight Computer and explains its integration with the Jeti 2.4Ghz Duplex Systems! (9:15)
