Jeti Pilot Gernot Bruckmann’s Fokker Dr.1 In Action!
Check out the CARF Rebel Max and Rebel Hot at Jet Power 2019!
We wanted to share these pictures of the Rebel Max and Rebel Hot from CARF. Check out the amazingly clean Jeti install in the Rebel Max. It features a Jeti Central Box 200 with the RC Switch and RSat2 receivers (we recommend R3/RSW receivers for US customers) running through a Bavarian Demon Cortex Pro gyro system.
If you happen to be at Jet Power 2019, stop by the CARF booth and take a closer look for yourself.
These Yokes Are No Joke
The RFM Aluminum Offset Clamping Yokes were specifically designed for high performance scale sailplane applications with Front Electric Sustainer/Self-launcher (FES) electric motors.
The offset yoke design allows the prop blades to fold closer to the fuselage than with a conventional design, reducing drag while flying without the power. A simple All-In-One solution. Grab some, here.
Stop Killing Your Model, Eliminate Connector Harming Flash.
The Jeti Model AFC connectors eliminate the flashes often witnessed when connecting controllers (ESCs) and battery packs. Available in 4mm, 5.5mm and 8mm variants the female plug supports a SMD resistor that does away with the usual flash that occurs during connection and can harm the surface of both the male and female plugs. The set contains two male, single female and an AFC female connectors together with red and black shrink wrap.
Replace your existing connectors or install inline between your existing connector and speed controller for eliminating connecting flash spark.
Jason Cole: Making the US F3K World Championship Team
Our friends at Model Aviation sent us over a spotlight article on one of our favorite Jeti pilots. Enjoy!
Two New DS-12 Trays Are Here!
We have both the DS-12 Carbon Tray (w/ brackets!) and the DS-12 Lite versions available to add stability and comfort to your flying experience. Take your pick!
Our New 3DH 74” Edge 540 Jeti/Elite/Ditex, Done and Ready!!!
Our brand new addition to the Esprit Fleet. New 3DH Edge 540 is powered by Esprit Elite 30cc Motor, Mezon Pro 80 ESC, Jeti Pro Power 4000mAh 12S battery and Fiala 19×10 propeller with Falcon CF electric spinner.
Controlled by Jeti REX 10 Assist stabilized receiver and equipped with full telemetry package using data from Mezon Pro ESC (V/A/mAh/BEC) and motor equipped with Temperature (MT125) and RPM (MRPM-AC) sensors.
Have you seen our Carbon Blue Jeti DC-24?
We got this beauty in today for one of our international customers. Look how gorgeous this color is. Pick up one of our other DC-24’s, here.
3DH 74” Edge 540 with Jeti/Elite & Ditex (12S/2600W)
Another awesome build from our shop. Clean design, simple setup using only proven components.
Elite 30cc Motor, Jeti Mezon Pro 80 ESC w/BEC, Ditex Servos, Fiala Propeller and Secraft Hardware.
Full telemetry package using data from Mezon ESC (V/A/mAh/BEC) and Motor equipped with Temperature (MT125) and RPM (MRPM-AC) sensors.
