Did you know that with the DS-12 you can assign Functions Wirelessly from Transmitter?
Every Jeti receiver provides a direct link for wireless programming. Log in to the receiver using.
Device Explorer in the transmitter menu and assign your servos to any receiver output pin that you choose.
Bad Rx location or short servo extensions are no longer a problem with the Jeti system.
Did you know that with the DS-12 you will setup Servo Fail-Safe Positions Wirelessly from Transmitter?
Every Jeti receiver provides a direct link for wireless programming. Log in to the receiver using the.
Device Explorer in your transmitter menu and setup servo Fail-Safe positions directly using the Tx screen.
No need to keep rebinding receivers or to keep them in accessible locations like with other systems.
Did you know that with the DS-12 you can see when your Receivers or Sensors are Connected?
Go to the Device Explorer menu in your transmitter and you can see if your Receiver is connected right on the Transmitter screen. Check marks show what devices are on-line and accessible.
Did you know that with the DS-12 you can easily change your Background and Profile Images?
Customize every screen and play with any backround. Jeti allows you to upload any image and even customize the location on your screen.
Did you know that with the DS-12 you can easily monitor and record your Rx Battery Voltage?
Every Jeti receiver provides receiver voltage battery monitoring and live downlink.
This allows you to set up custom telemetry alarms that will alert you if there is drop in your Rx battery.
Did you know that with the DS-12 you can easily monitor and record the quality of your RF Link?
The DS-12 transmitter allows you to customize your screen and immediately see how your RF link is performing.
You can see A1 & A2 antenna strength in a scale from 0-9 and Signal Quality as a direct percentage.
This allows you to set up custom telemetry alarms to alert you if there is a drop in your RF link.
