Video Release – A Closer Look: Jeti REX Assist 2.4GHz Receiver Programming

On By hajek

The REX Assist receivers enhance the REX series of receivers and extend it with the intelligent flight stabilization feature, which is designed for airplane models and multicopters. This stabilization works in all three axes of the model and facilitates flying in windy or otherwise challenging conditions.

Features:

  • – Up to 16 Stabilized Individual Channels
  • – Available Telemetry: Rx Voltage, Signal Quality/Strength, G-Force, Attitude Orientation
  • – Different Multicopter Types, from Tricopters to Octocopters
  • – Up to 3 Adjustable Flight Modes, Options for Stabilizing the Horizon and Altitude – In-flight Gyro Gain Tuning Using Available Channels
  • – Latest 3-axis Gyroscope, 3-Axis Accelerometer and Barometric Altimeter
  • – Wireless Transmitter programming and PC Support

Registration Is Open

On By hajek

Hey guys! We just wanted to let everyone know that registration is open for the 2018 Jeti Flight Fest in Sebastian, Florida. You can find all the important information on RC Flight Deck’s website. There is a two-part registration process we wanted to explain.

First – Head over to RC Flight Deck to register your pilot information. Here we have 3 choices for registration day, so make sure you pick the one that reflects the date or dates you plan on attending.

Second – Payment. There are two options for a payment method. If you wish to pay cash, you can pay at the door. Please note: NO CREDIT/DEBIT cards will be accepted at the door. If you are paying with a credit/debit card, head on over to Esprit Tech’s site and purchase your registration.

If you have any questions reach out to us at support@esprittech.com.

Hope to see you there! Happy Flying!

It’s Official! The DS-24s are FCC Certified!

On By hajek

We would like to announce that on February 1st. at 15:00 EST the Federal Communication Commission and Industry Canada, Granted Equipment Authorization (FCC), and Certificate of Acceptance (IC) to Jeti USA (Esprit Model Inc.) for the Duplex DS-24 Radio System.

After spending hundreds of hours and thousands of dollars we can say that this was our most complicated, expensive, extensive, and exciting project to date. We cannot express our gratitude enough to all of the people who believed in us and contributed to bringing one of the finest and most advanced radio systems to the American market.

We are expecting that we will start shipping DS-24 next Monday.

(Full Story)

SkySword Maiden Flight

On By hajek

Gaze upon Bob B.’s SkySword EDF jet as it is put to the test in its maiden flight. The SkySword from Hobby King is comprised of a 1.2 meter wing and a fuselage that measures a length of 1.3 meters. Bob has got this baby running with a 90mm EDF and 4400mAh 10 cell battery set up. The control surfaces are controlled by MKS 6100 servos and of course he flys it on his trusted Jeti Transmitter System. The Jeti R11 is Bob’s receiver of choice and he is running the MUI200 for battery telemetry. Future plans for Bob include installing the Jeti MSpeed Airspeed telemetry sensor. What a beautiful jet Bob, thanks for sharing it with us!

 

Jeti Model Pilot Gernot Bruckmann’s Big Piper

On By hajek

Check out Gernot’s 4.5M Piper Cub Clipped Wing.

[The] Piper is powered by four-piston four stroke Fiala FM 280 with [a] Fiala 38×14 propeller. Control surfaces, carburetor, and tow line release are controlled by 12 servos all connected to the Central Box 200. Piper is also equipped with Optotronix lighting and Emcotec smoke pump. Gernot uses transmitter JETI Duplex DC-24 and receivers JETI Rex 3 and RSat 2. Electric power is provided by JETI PowerIon batteries.

*Information written by Jan Bitter