Start new 2019 season with brand new Jeti DS-12 2.4GHz/900MHz Dual Band radio system. Dual band, dual redundant frequency hopping radio system is fully designed and manufactured by Jeti Model in the Czech republic. With 12 channels, mini USB port, built-in speaker, headset jack, plastic transmitter gimbals with Hall sensors (4096 step resolution) and 4 ball bearings for precision movement, a large 320×240 color, backlight display and many other features the Jeti DS-12s are sure to become the new standard in transmitter performance.
New Mezon Pro ESCs with Direct EX Bus Control
Did you know that with new Mezon Pro ESCs you can save channel on your receiver and use EX Bus to control throttle directly?
Gernot, Jeti DC-24 & Elite E105-30 9000W Motor
Gernot Bruckmann is testing new Elite E105-30 135 Brushless HD Outrunner Motor.
Check out how 14S, 30×13 prop at 170A (9000W) looks like.
Jeti Ditex Line of Servos is Finally Complete
New Jeti Ditex TD 0606M & TD 0806MD servos just showed up.
Weekend Fun with X-Plus and 1500W
What did you do this weekend? Our X-Plus CF hotliner with Jeti DS-24, Neu 1515/3D motor, 2700 5S battery, 7×7 prop and Mezon Pro 80 ESC performed flawlessly. (80A/1500W/25,000 RPM = FUN)
The X-Plus, New Addition to Our Demo Fleet
Carbon Fiber Fuselage & 2.4GHz Antennas
Jeti Central Box 100 Power Distribution Unit (Mini Dual Redundant System)
The Central Box 100 is a switchboard designed for the complete management of servos in a model with an emphasis on safety. The Central Box has a unique design that provides overload protection at each servo output. The Central Box can manage up to eight servos and fully supports the Jeti EX telemetry system. Up to two receivers with serial (PPM, EX Bus) output can be connected at the same time to the Central Box for complete RF signal redundancy.
With Jeti Duplex 2.4GHz DC/DS transmitters, the full potential of the Central Box can be used, such as an easy way to wirelessly configure the Servo Outputs, EX Telemetry, Fail-Safe Setting or Fast Servo Response.
Features:
– Control Management with Configurable Servo Output
– Power Distribution with Overload Protection
– Firmware Updatable via Jeti USB Adapter
– Jeti Duplex EX Bus or PPM Compatible
– Wirelessly Programmable Using DC/DS Tx Device Explorer
– Independent Receiver Signal Inputs (Rx 1, Rx 2)
– Up to 8x Servo Outputs with Overload Protection
– Up to 3x Telemetry Sensors Inputs
– Output Current: 10A Continues/90A Peak
Jeti Telemetry Expander E4 EX
The Jeti telemetry expander module allow you to increase the number of telemetry sensors in your aircraft. The E4 ex Expander allows you to add up to four additional sensors directly to any of the Duplex EX 2.4GHz receivers.
Through the Duplex 2.4GHz system and either a JetiBox Profi or Jeti Transmitter you can monitor your data and alarm conditions in real time.
Operational Voltage: 3.2V to 8.4V
Dimensions: 36mm x 20mm x 5mm
Weight: 4g
Gernot Bruckmann Wins Tucson Aerobatic Shootout Invitational and Freestyle Champion
Congratulations Gernot Bruckmann on your dual wins last weekend at the Tucson Aerobatics Shootout in Tucson, Arizona. Gernot traveled all the way from Villach, Austria to compete. His first day of practice was a bit rainy but he flew anyways.
His Facebook post reads “How crazy is this, I still can not believe, Tucson Aerobatic Shootout Invitational and Freestyle Champion💪😎 this is really like a dream came true 👌
I really have to thank all who made this possible, of course all my family, sponsors and of course my girlfriend Bettina Schwaiger for all their help and support 👌”