Now you can fly your Bind and Fly device on Jeti!
What you’ll need:
Tactic AnyLink Air Module, Male to Male adapter (TACM0004), Jeti Receiver, Receiver Battery, Jeti Transmitter, and your bind and fly device.
Using the male to male adapter, simply plug the AnyLink Air Module into the PPM Port (set for negative ppm output) connect to your device, and you’re good to go!
Flying his newly refurbished and repainted PST Reaction, Jim was one of about 45 registered pilots at the Arizona Jet Rally this weekend. “We were blessed with light winds and blue sky, so flying conditions were great,” States Jim. His Reaction, set up to resemble an F-4 Phantom is complete with dual cockpit, lights, and droppable centerline tank runs an R14 and an R3 Receiver, MVario, MGPS, Xicoy-Jeti ECU adaptor, and a Cortex Gyro. His jet was such a hit, he won “Best Sport Jet”. Way to go Jim!
Pre-Order your Main Switch 200 now. Main Switch is an electronic primary switch designed for switching of the main power supply (Main Battery) for your RC model. It adds an element of safety when handling the model, without the need to physically disconnection of the main battery pack. The advantage of an electronic switch is that it offers a virtual unlimited On/Off cycles, unlike mechanically operated switches. The Main Switch prevents the connectors from sparking when connecting the batteries, in fact it also replaces Anti-Spark connectors. Two versions are offered; Main Switch 200A with Magnetic Switch, or Main Switch 200 with R3/Wireless Switch.
Watch James as he takes you through the 2nd part of the Basic Jeti Programming series. Topics covered are Servo Setup and Fine Tuning (Dual Rate Expo; Function Curves).
Check out full composite, 7.5m (25’), 23.5kg (52 lbs.) ASW 27 1/2 Scale Sailplane powered by Jeti DS-16 Radio, Hacker TopFuel 5800 10S Battery, and using Emcotec DPSI 2018 Power & Signal distribution unit.
These solder couplers provide a larger area for solder contact than soldering directly to the connector pins. They also provide strain relief for your servo and power leads at the connector. Easy to install, these Multiplex Connector Solder Couplers are great for any project!
Production Starts November 17th 2014!!!!
Check out this Jeti Press Release for more information about the availability of the Racer and Phoenix Radio Systems.
Jeti USA Press Release!!!
Introducing “Limited Edition” Red Racer & Black Phoenix, Jeti Duplex 2.4GHz DS-16 Carbon Radio Systems!!!
Check out our New upcoming Jeti USA “Limited Edition” Christmas Line of Radio Systems!!! Only 20 pieces of Limited, All Numbered Radio Systems will be Released in Each of the Series. Total of 40 radio systems are Scheduled for 2014.
The Limited Edition, Numbered radios will be produced in either the Red/Black “Racer” or the Black/White “Phoenix” schemes. The set includes a Limited Edition Jeti DS-16 Carbon Transmitter, Carbon Commemorative Plaques, and Transmitter Case.
Production and shipping are scheduled between November 15 and December 15. All custom radios ordered by December 1 can be delivered by Christmas of 2014.
Check out this great instructional video focusing on Basic Setup of your Jeti transmitter
